Room Divider & Temporary Wall

Nookwall is a DIY, Expandable, Room Divider/Temporary Wall System.

Nookwall is made of two components of telescoping compression poles and fleece fabric panels. It is lightweight, portable, configurable, expandable, adjustable, and washable. The poles are placed approximately 5 Ft apart and the fleece fabric spans from pole to pole by plastic c-clamps to create the overall surface of the wall.

The panels are similar to a fleece blanket. They are shipped to you folded or rolled and can be folded or rolled when not in use. When setup and spanning from pole to pole they are held tautly and have a neat, clean look.

Yes, there are several colors from which to choose. Samples are available on the on-line store for a nominal cost just to cover the cost of shipping.

No. Nookwall is held strongly by the spring in the compression poles. When setup property, it will not fall over.

Yes. Nookwall is completely DIY. Anyone can set it up.

Assemble the poles and place them vertically at approximately 5 Ft apart. Attach the fleece fabric from pole to pole with provided plastic c-clamps. Refer to the setup page for instructions. https://www.nookwalls.com/setup.

No tools are needed to set up Nookwall. All the parts are held in place by their own design mechanism. All you need is a step ladder or a chair to be able to place the fabric on the top of the pole near the ceiling.

Nookwall works for ceilings of 7 Ft to 9 Ft high. If your ceiling is higher, please contact us and we can discuss a special solution for you.

The fleece panels are 5 Ft wide x 8 Ft high. To reduce the height, fold down at the top. For example if you want your panel to be 7'-6", you can fold it horizontally by 6" at the top. To reduce in width, roll or drape at either end to reduce width up to 2', so a 5' wide panel can be 3' wide. The fleece can also be cut with scissors to reduce in size to meet your needs.

No. You cannot see through the Nookwall fabric. They provide full visual privacy.

Nookwall is designed to work with ceilings which are a hard, flat surface such as drywall. If your ceiling is a drop/lay-in tile ceiling then the poles must be placed on the grid otherwise the spring mechanism in the pole will push up the ceiling tile. If your ceiling is a drop/lay-in tile ceiling, please contact us and we can discuss a special solution for you.

Only one person is needed to set up Nookwall.

Nookwall can be set up in less than 30 minutes.

Yes. Nookwalls can be moved during or after set up and reconfigured. Sections can be added or removed and placed at different angles.

Yes. 6" x 6" samples are available on the on-line store for $2.

Nookwall will not leave any marks of any kind. The top and bottom of the poles have rubber caps to keep your surfaces unmarked and to grip the system in place. No nails, no screws, no tape, no hardware of any kind is needed. When you remove it there will be no sign indicating it was there.

Nookwall is very lightweight. Each pole weighs 4 pounds and each fleece fabric panel weighs less than a pound.

The Nookwall fleece panels are machine washable. Simply remove them from the poles and put in washing machine.

We offer installation services in the New York City area for an additional fee. However, the system is completely DIY and you can call us if you need help with setup. All of our customers have been able to set it up on their own.

There are two types of "doors". The "drape door" and the "pole door." The drape door works by removing some of the c-clamps from the fabric and walking through. You can then re-apply the c-clamp if desired. The pole door works by pushing down on the pole which shortens it from the ceiling and walking through. You then allow the pole to spring back up against the ceiling. Videos showing each of the doors are on the home page of the website. https://www.nookwalls.com/

Yes. Use for 30 days. If you are not fully satisfied you may return the product for a full refund.