How to Setup Your Nookwall

Setup Nookwall "Thick" Room Divider

Two sections of 5 Foot Thick Nookwall

Top of finished Thick Nookwall

Bottom of finished Thick Nookwall

Organize your poles and fabric panels and prepare for setup

Place poles in their approximate location to suit your layout, generally 5 feet apart. You can always adjust them during or after set.

​

Telescoping poles extend up to handle 9'-0" ceilings

​

Pressurized design holds poles firmly in place at floor and ceiling

Bring fabric towards rounded corner of block at top of pole

Wrap fabric around rounded corner of block at top of pole

Apply c-clamp over fabric to grip fabric to rounded corner of block

Finished top of wall with both Main Panels applied and both End Panels applied

Let fabric panel drape down and fold under toward inner side

Grab folded bottom corner and pull down taut to bottom of block at floor to meet height of your room

Pull fabric around rounded corner of block and prepare to apply c-clamp

Apply c-clamp

Pull up the inner end corner taut, wrap around lower portion of pole and apply c-clamp

Perform same application at other side. C-clamps applied at bottom. Inner side of fabric pulled up and held to pole with C-clamps.

Take the End Cap Panel and bring towards top of assembly

Apply larger diameter c-clamps (labeled 2) to both upper corners of End Cap Panel

 Prepare to apply End Cap bottom

Fold up inside and pull at fold taut down and around rounded corner of block. Prepare to apply c-clamp

Apply larger diameter c-clamps (labeled 2) to both lower corners of End Cap Panel

Bottom end cap finished with c-clamps on both sides. Tuck the folded inner side of fabric into cavity of wall.

Quick video of setting up Nookwall Thick Room Divider

Setup Nookwall "Thin" Room Divider

Finished top at outside

Finished top at inside

Finished bottom on outside

Finished bottom on inside

Organize your poles and fabric panels and prepare for setup

Place poles in their approximate location to suit your layout, generally 5 feet apart. You can always adjust them during or after set.

​

Telescoping poles extend up to handle 9'-0" ceilings

​

Pressurized design holds poles firmly in place at floor and ceiling

Pull fabric around pole at top just below rubber pole tip

Apply c-clamp to top

Top is set with c-clamp applied.

Perform same application at top of other pole.

Gather fabric at bottom and fold up toward pole

Grab folded bottom corner and pull down and taut just above rubber pole tip to desired length to meet height of your room

Pull fabric across face of pole towards back to wrap around pole

Wrap fabric around back of pole

Apply c-clamp to bottom of pole just above rubber pole tip

Pull up corner of fabric on inside and bring towards pole

Continue to pull corner of fabric towards pole

Align edges of fabric and hold taut

Hold edges aligned and wrap fabric around pole

Apply c-clamp to top of folded bottom edge.

Adjust and rotate c-clamps inward to wrap fabric over and cover pole to give a neat look.

Bottom is set. Perform same assembly at other side.

Quick video of setting up Nookwall Thin Room Divider

Setup a Corner Section of Nookwall Thick Room Divider

Corner of Nookwall Thick with 2 @ 5 Ft Sections

Top of inside face of corner section

Bottom of inside face of corner section

Inner corner of inside face.

Fasten fabric to upper inside corner and apply c-clamp.

End of inside face.

Bring fabric about 4 in past upper inside corner and apply c-clamp.

End of inside face. Apply c-clamp.

End of inside face. Fabric should wrap have excess past c-clamp of about 4 in into area where end cap will be placed.

Inner corner of inside face. Fold up underside of fabric at inside corner to meet desired height of your room. Pull down taut and apply c-clamp.

Inner corner inside face. Pull up inside portion and fasten to pole with c-clamp

End of inside face.

Bring fabric to end and overlap by about 4 in and fasten c-clamp.

End of inside face.

Pull up inside portion and fasten to pole with c-clamp

Inner corner of inside face. Apply c-clamp at inside corner top. Try both diameter sized of the c-clamp. Extras  provided with your order.

End of inside face. Bring fabric about 4in past upper inside corner and apply c-clamp.

End of inside face. Perform same setup at other side.

Inner corner of inside face. Fold up underside of fabric at inside corner to meet desired height of your room. Pull down taut and apply c-clamp.

Inner corner of inside face. C-clamp applied. Also pull up inside portion and fasten to pole with c-clamp.

End of inside face. Fold up underside of fabric at inside corner to meet desired height of your room. Pull down taut and apply c-clamp.

End of inside face. Pull up inside portion and fasten to pole with c-clamp.

Assembling Nookwall Pole

• Place the spring in the shorter 3/4" dia tube (it will be delivered this way).

• Loosen the twist lock on the 5/8"dia tube and the longer 3/4" tube. Extend out the 5/8" dia tube but don't remove it from the longer 3/4" dia tube.

• Position the shorter 3/4" dia tube on bottom. Insert the extended 5/8" dia tube into the shorter 3/4" dia tube. Position the longer 3/4" dia tube on top.

Placing Nookwall Pole in Your Space​

• Set the pole in the location where you want it to be. You can easily adjust it later.

• Put the top of the pole about 12" to 18" off of vertical from the bottom of the pole.

• Turn the twist lock very tightly. It must be tight.

• Push down on the top portion of the pole so it is not touching the ceiling anymore.

• Bring the pole to vertical and let the top of the pole spring upward against the ceiling.